How Much Does It Cost to Paint a Motorcycle

How Much Does It Cost to Paint a Motorcycle

How Much Does It Cost to Paint a Motorcycle | What is the Exact cost

You may be wondering where to begin and how much it will cost you if you recently purchased a second hand motorcycle or have had one for years that needs a paint job. Used motorbike values can hold their value relatively well, but if someone seeks to sell their hog quickly, the prices of motorcycles might be below. However, repairing a bike and bringing it back to life can be costly. 

If you want to paint your car, a few solutions will save you money. If you have the finances, getting a professional bike paint job, or even a custom one, can be fantastic. It’s a good idea to paint your own house.

Painting Projects regularly 

Standard motorcycle paint jobs will differ depending on your area, the shop where you finish the paintwork, and your specific bike. Having a motorcycle painted often ranges from $300 to $1,600. 

Much of this cost is determined by how much work needs to be done on your bike before being painted. If you only need an essential layer of paint and your motorcycle is in excellent condition, the cost will be significantly lower. If you are not confident enough in your DIY skills to paint a bike yourself, it may be worth the money to hire someone to do it for you for roughly $300.


It’s crucial to keep in mind that painting a motorcycle almost always necessitates either minor or major body repairs, as well as minor dings and dents. Before you decide on a price, you can discuss this with the person painting your bike. 

If you’re okay with a paint job covering one or two minor dents that are hardly evident, this is an option. One of the most time-consuming components of painting is sanding off the old paint before applying the new (even if there is no damage).

Customized Painting

The price will be considerably higher if you want to do more than slap a coat of paint on your car and want a bespoke job with flames, stripes, or other intricate designs. The cost of a bike varies based on the location, the artist, the type of shop you visit, and the bike itself. 

Custom paint treatments on motorcycles can cost anywhere from $800 to $2,500, depending on the level of detail. The cost of high-end bikes and excellent custom paint jobs can range from $15,000 to $30,000, depending on the paint job.

A Motorcycle Paint Job Done at Home 

Painting your motorcycle is a viable choice if you are on a tight budget or enjoy and prefer doing things yourself. Before you begin, read up on the proper practices and view some of those processes in action with a few movies. There are various instructional videos on how to paint your hog, including some that demonstrate applying methods like the wrap look.  Depending on the materials, a do-it-yourself paint job could end up costing less than $100.

How to Hand-Paint a Bike 

You’ll need a large area where you can make a paint mess if you’re going to paint a motorcycle yourself. Never spray your bike in a room with insufficient ventilation. Even if the garage door is open, an oscillating fan should be installed to prevent the accumulation of gases. 

Remove any sections of your bike that need to be painted if you can. Determine which Allen wrench size is required to remove the tank. Bolts should be stored in plastic bags and labeled, for example, “rear fender.”

The surfaces that need to be painted will then need to be sanded. If the service isn’t done correctly, the paint job will be uneven and unappealing. If you don’t have a power sander, buy a couple of different grits of sandpaper and remove the old paint in a circular motion. 

Wipe down the surface after sanding to remove any remaining dust. Make sure you’re painting on a clean canvas. If there are any dents, body filler can now be used to smooth them out. Apply it 1/8 of an inch thick and make sure it doesn’t clump together.

Once the body filler has dried completely, you’ll need to sand the surface again. Before painting, inspect these areas in bright light to ensure smoothness. 

Painting Techniques 

Before you start painting, you’ll need to apply two coats of epoxy primer. In the long run, this protects metal from moisture and helps to avoid rusting. Before starting this process, read the instructions on the epoxy container carefully.

After the second coat of epoxy has dried, lightly sand the surface. wet-and-dry sandpaper with a grit of 2000 is recommended. Before you begin, make sure your paint spray gun is clean. When loading your sprayer, mix the paint with the recommended thinner. 

Then, using the spray gun, apply three or four layers of paint to the areas that need to be painted. Spraying your motorcycle up close or holding the sprayer in one place is not a good idea. Even quick movements should be employed in strokes across the bike’s surface. To protect your fresh paint job from the weather, use clear coat lacquer in two coats (per the package directions). 

How much will it cost? 

Painting your car yourself versus engaging an expert to perform a complex design that takes several hours of labor to paint and fix will save you a lot of money. Expect a simple service on a good-condition bike to cost at least a few hundred dollars, plus the expense of any damage or custom designs you might like. You’ll be able to determine whether it’s worth the money or your time to try it yourself.