How to Make a Paper Airplane Glider

How to Make a Paper Airplane Glider

Table of Contents

How to Make a Paper Airplane Glider

Use a flat, thin-edged ruler for the best results. Make clean creases along all four edges. Using double-sided tape on the inside of the body prevents the wings from separating in flight.

The Basic Paper Airplane Method

The most basic version. A basic standard that everyone should be able to make.

  1. Vertically fold the paper in half.
  2. Fold each of the top corners into the centre line after unfolding the paper.
  3. The top edges should be folded into the centre line.
  4. Fold the plane in half so that it is facing you.
  5. Fold the wings down, matching the top edges up with the body’s bottom edge.
  6. Tape the inside of the body with double-sided tape. This is how the finished plane should look.

Art Deco Wing

Fold the bottom corner of the square and the top edge to the center line of the model. Then fold the edges of the model up to the vertical center line. Once the wings are folded, you’re ready to fold the tail flaps. Repeat the folding process on the other side. Flip the model over and repeat the process. You’ve now completed the first step of folding your Art Deco Wing paper airplane glider.


To fold the wings, fold the bottom edges to the center line. Fold the top layer toward the bottom edge. When the model is folded, squeeze in the sides. Repeat for the remaining wings. Repeat these steps for the second flap. Fold the top edge and the bottom layer to the center line. Then fold the bottom layer up toward the top edge. Repeat this step to fold the rear edge. Fold the wing tips in half vertically. Unfold the keel. The rear corner should be folded up. Once the wing flaps are folded, turn the model over.

The Art Deco Wing paper airplane glider is considered a medium-level origami project. It takes about an hour to complete. The basic materials are single sheets of paper. It is a simple yet complex design. You can purchase a complete training course on how to fold a paper airplane glider using the Premium A-to-Z Microsoft Excel Training Bundle. This course provides access to 40 hours of instruction.

Professor Yasuaki Ninomiya designed a high-performance paper aircraft. Two of his books are published and sold in paper glider packs. The fuselage and wings are designed with low-speed aerodynamic engineering principles. These gliders are also made of Kent paper, a type of cartridge paper sold in Japan. So, if you are interested in learning how to build a paper airplane glider, you should buy one of these books.

A great paper airplane glider kit should include a fun, informative intro. A well-done pilot can easily master the steps in building a paper airplane glider. This kit includes instructions and tips for a successful flight. It is also available in several designs, such as the elegant Art Deco Wing and the no-frills Stacked Over Logan. You can select the paper plane kit according to the size and shape of your paper airplane.

The Art Deco Wing paper airplane glider can fly as high as 85 meters! A small wind tunnel was used to test flight performance. It also used weight balances and asymmetric wing construction to optimize flight. Its flight performance is similar to those of Dr. Ninomiya’s flat gliders. However, this model is remarkably sensitive to trim. You can even launch it indoors to make a long flight in confined spaces. It can also fly a full length of a Rugby pitch when launched. A Bungee hook construction is also included in the Paper Pilot 3 and Paper Pilot 12 Planes kits.

Art Deco Wing design

In the late 1960s, origami artist Michael LaFosse created a pure paper flying wing that mimicked the shape of some hang gliders and supersonic airfoils. This unique design evolved from folded paper, but still possesses a beauty equal to that of other paper wing designs. The paper airplane glider was later published in the book Wings and Things, by Stephen Weiss.

Begin folding the model by starting at the thick nose. Fold the wing flaps into the center line, 1/2 inch in front and one-half in back. Once you’ve folded it up, add double stick tape to the inside of the body. Fold the top right corner over, meeting the crease of the first fold. Repeat for the left corner. Then fold the top right corner over to meet the crease made in the first fold.

Another Art Deco paper airplane glider design is the Hornet. This paper airplane glider is an excellent choice for intermediate builders. Its short wing span, “harmless” appearance, and vertical tail make it a versatile choice. The Hornet has an impressive hang time, and the wing design can be altered to achieve more speed and distance. The Hornet’s wing design can also be adjusted to allow for a more meandering flight plan. This plane does not drift aimlessly. It can be weighted down and moved, just like a balsa wood plane.

Art Deco Wing flight path

The “Art Deco Wing” is one of the best pieces of pure origami flying wing architecture. The one-sheet design resembles some hang gliders, but is equally at home with supersonic airfoils. Michael LaFosse created the design after exploring folded paper first, and it has been compared to many of the best paper wing designs ever created. LaFosse’s design is featured in the book “Wings and Things.”